You have no items in your shopping cart.
Details
Aquatec Pressure Boost pump CDP 8800 series (High flow) 3/8" and 1/4" fittings
Including: pump + tranformer 220V-230V/50Hz + both 3/8" and 1/4" fittings
Aquatec model # 8852-2J03-B424
Internal part # HF-88-220V (pump + transformer+ fittings)
Made in USA
This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
This pump is suitable for RO systems that is 100GPD to 200GPD
* This item is for the pump+ transformer 220V-230V/50hz EURO plug + 3/8" and 1/4" fittings. We have other items with 110V/60Hz USA plug pump +transformer, or just the transformer, solenoid valve and pressure switch.
Benefits of using Booster pump for Reverse osmosis systems:
For RO systems, an increase in input pressure means an increase in water production and water purity
RO systems will run more efficiently and have less drain water output. Since it uses pressure switch and solenoid valve to turn on/off the water input, it can turn-on and turn-off more accurately than the mechanical auto-shut-off valve.
For large water container or open water tank, you can use float switch or level switch to control the operation of the pump as well.
The transformer included in the package is plugged into European 220V-230V/50HZ electrical outlet
Specifications:
Booster Pump Boost pressure: If input water pressure is about 30 to 50 psi, the pump will boost pressure to about 60to 80 psi for RO systems.
Water Open Flow: 2.6 liter per minute or 0.69 gallons per minute
Electrical: 24VAC, 0.70Amp to 1.65amp
Connection: Inlet and outlet, 3/8" quick connect fitting, also includes two reducer 3/8" to 1/4" fittings
Motor: Permanent Magnet, 24VAC, enclosed
PUMP: Diaphragm pump, 3 chamber, self-priming 7 feet prime. It is able to run dry
Materials:
Housing: Nylon
Valves: EPDM
Diaphragm: Santoprene
Fasteners: Stainless Steel
Dimension: diameter = 3.5" , length = 7.5"
Weight 7.5 lbs.
Transformer input 220-230VAC 50hz output: 24VAC 2Amp, Class 2, UL listed
This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
This pump is suitable for RO systems that is 100GPD to 200GPD
* This item is for the pump+ transformer 220V-230V/50hz EURO plug + 3/8" and 1/4" fittings. We have other items with 110V/60Hz USA plug pump +transformer, or just the transformer, solenoid valve and pressure switch.
Benefits of using Booster pump for Reverse osmosis systems:
Specifications:
Materials:
Dimension: diameter = 3.5" , length = 7.5"
Weight 7.5 lbs.
Transformer input 220-230VAC 50hz output: 24VAC 2Amp, Class 2, UL listed
